Brenner funktioniert plötzlich nicht mehr

[SouLy]

Hallo allerseits.

Seit kurzem brennt Nero mir meine Dvds nicht mehr.

Beim Buffern steht immer zuerst lead-in, dahinter recorder aktiv aber die leiste wird nicht voll, bis irgendwann ein fehlgeschlagen daraus wird und er die dvd ausspuckt.

jmd ne ahnung woran das liegen kann ?
xp als betriebssystem und nen dvd integrierter brenner im thinkpad r60
, er heißt HL-DT-ST DVDRAM GMA-4082 N !
Nero ist ne portable Version. Bisher hat immer alles einwandfrei geklappt, dann von heut auf morgen nicht mehr...
Hier mla das nero logfile:

Field
1K22-2867-0K95-61K4-5000-CKAC-****
9C01-6055-99M5-2C6M-9459-EXEC-****
5C06-60K5-98K4-238K-8MKC-71XA-****
KC00-60C2-9961-211X-M7X3-KX3K-****
9C04-60XA-9865-262X-554M-KA25-****
5C05-60E1-9964-2210-7A86-2278-****
9C0M-60MK-98M4-25AM-8MEK-65C4-****
4C0X-60CK-9960-227M-474E-5XKE-****
5C0E-60E4-99K3-227E-6K92-47E2-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.4
Internal Version: 8, 1, 1, 4

Recorder: <HL-DT-ST DVDRAM GMA-4082N>Version: CX08 - HA 1 TA 2 - 8.1.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <FA1250H JUX530G >Version: 1.01 - HA 1 TA 1 - 8.1.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HTS541080G9SA00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GMA-4082N atapi Port 1 ID 0 DMA: On
CdRomPeripheral : FA1250H JUX530G 1.01 am7x6lvc Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
FA1250H JUX530G E: CdRom1
HL-DT-ST DVDRAM GMA-4082N D: CdRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1014MB (1038700kB)
Free physical memory: 252MB (258492kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.4.2008
ISO Zusammenstellung
00:21:11 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

00:21:11 #2 Text 0 File Isodoc.cpp, Line 6671
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

00:21:12 #3 ISO9660GEN -11 File Geniso.cpp, Line 3347
First writeable address = 0 (0x00000000)

00:21:12 #4 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

00:21:12 #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

00:21:12 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 359039 ( 79:47.14, 701MB)

00:21:12 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

00:21:12 #8 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GMA-4082N, Media type: DVD-R
Disc Manufacturer ID: <RITEKF> <1>
Disc Application Code: 64, Disc Physical Code: 193

00:21:12 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

00:21:12 #10 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 359040 (359040) = #359040/79:47.15
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 359040 blocks [D: HL-DT-ST DVDRAM GMA-4082N]
--------------------------------------------------------------

00:21:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [D: HL-DT-ST DVDRAM GMA-4082N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 735313920, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 359040 | 0 | 0x00
359040 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

00:21:13 #12 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

00:21:13 #13 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

00:21:13 #14 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

00:21:13 #15 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

00:21:13 #16 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

00:21:13 #17 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 4x (5.540 KB/s)

00:21:13 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

00:21:13 #19 Text 0 File DVDR.cpp, Line 3245
Recording mode: Sequential Recording Mode

00:21:13 #20 Text 0 File DVDR.cpp, Line 3401
Start write address at LBA 0
DVD high compatibility mode: Yes

00:21:13 #21 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
Outer Limit of Data Recordable Area: 26127F h
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0, Extended part version: 33
Start PSN of the Extra Border Zone: 2FE10 h
Start PSN of Physical format information blocks in Extra Border Zone: 2FFA0 h
Media Specific [16..783]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01 40 C1 FD 9E D8 52 00 - 02 87 0D 13 87 88 90 00 .@....R.........
03 52 49 54 45 4B 46 00 - 04 31 00 00 00 00 00 00 .RITEKF..1......
05 88 80 00 00 00 02 00 - 06 09 0F 15 87 88 90 00 ................
07 A8 82 00 20 00 00 00 - 08 06 16 10 14 0F 0B 00 ................
09 94 07 0D 0B 88 88 00 - 0A 80 00 00 00 00 10 00 ................
0B 09 1E 17 A7 89 85 00 - 0C B7 89 02 00 20 02 00 ................
0D 00 00 D0 00 00 00 00 - 0E 0C 2B 39 33 29 1C 00 ..........+93)..
0F 50 1D 2B 0F 97 B5 00 - 10 88 80 00 00 00 00 00 .P.+............
11 00 00 00 00 00 00 00 - 12 0C 32 45 41 2D 27 00 ..........2EA-'.
13 50 23 2F 0F 97 B5 00 - 14 88 80 00 00 00 00 00 .P#/............
15 00 00 00 00 00 00 00 - 16 0A 4A 4F 4B 23 29 00 ..........JOK#).
17 80 1B 27 10 68 B5 00 - 18 88 88 00 08 00 08 00 ...'.h..........
19 00 00 00 00 00 00 00 - 1A 08 59 55 52 2D 2B 00 ..........YUR-+.
1B 60 1F 29 0B A9 B5 00 - 1C 88 80 00 00 00 00 00 .`.)............
1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

00:21:13 #22 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

00:22:07 #23 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 10 32 4D 03 0C 0C
Buffer x082e0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:22:07 #24 CDR -1135 File Writer.cpp, Line 306
Write error
D: HL-DT-ST DVDRAM GMA-4082N

00:22:07 #25 Text 0 File DVDR.cpp, Line 3803
EndDAO: Last written address was -1 (FFFFFFFFh)

00:22:07 #26 CDR -1135 File WriterStatus.cpp, Line 162
Write error
D: HL-DT-ST DVDRAM GMA-4082N

00:22:07 #27 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

00:22:07 #28 Phase 38 File dlgbrnst.cpp, Line 1764
Burn process failed at 4x (5.540 KB/s)

00:22:07 #29 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

00:22:10 #30 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

00:22:10 #31 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Opti